Our Infrastructure
Sprawled across a wide area, our infrastructure allows us to manufacture a wide range of Industrial Components. We have installed all the latest machinery and equipment in the unit so as to meet the bulk requirement of our clients. All the machines and sophisticated instruments are fully automated that aids us in cost effective production.
The List of Machines our workshop Lathe machine:
Length | No of Machine | Diameter Machine Facilities (Center Height) |
60 Feet Long (20 metres) | 1 | 1 metre Diameter |
40 Feet Long (12 metres) | 1 | 1 metre Diameter |
30 Feet Long (10 metres) | 2 | 34 inch Diameter |
24 Feet Long (8 metres) | 3 | 36 inch Diameter |
20 Feet Long (6 metres) | 2 | 38 inch Diameter |
18 Feet Long (5.5 metres) | 2 | 32 inch Diameter |
16 Feet Long (5 metres) | 3 | 38 inch Diameter |
Cylindrical Grinding Machines In Our Workshop:
1 | Upto | 500 MM DIA + 7000 MM Length |
2 | Upto | 500 MM DIA + 3500 MM Length |
3 | Upto | 300 MM DIA + 2300 MM Length |
List of Calibration Instruments in our workshop:
0-100 | mm | Outside Micrometre | Mitutoyo Make | Bore Gauge up to 1 meter 200 mm |
100-200 | mm | Outside Micrometre | - do - | Vernier Mitutoyo 12" - 1 No. |
200-300 | mm | Outside Micrometre | - do - | Vernier Mitutoyo 36 " - 1 No. |
300-400 | mm | Outside Micrometre | - do - | Inside Micrometre upto 600 mm |
400-500 | mm | Outside Micrometre | - do - | Dial Gauge to check runout. |
500-600 | mm | Outside Micrometre | - do - | |
700-800 | mm | Outside Micrometre | - do - |
Research and Development
We have developed a specific research and development department that helps us in the improvisation and expansion of our Industrial Components. Our R & D professionals undertake extensive research activities to reach new goals in the field we operate in. After the compilation of sufficient information, our professionals strive hard to enhance the features of the products so as to make them suitable for varied dynamic application areas. The rigorous research activities carried out by our professionals also enables us to keep abreast of the prevailing trends of the market.
Our Machinery
- Hydraulic Straightening Machine upto 12” round
- Cylindrical Grinding Machine upto 7000 mm long & 710 mm diameter
- Bore Gauge up to 1 meter 200 mm
- Vernier Mitutoyo 12" - 1 No
- Vernier Mitutoyo 36 " - 1 No
- Inside Micrometre upto 600 mm
- Dial Gauge to check run out
Planning Machine | 12 Feet Long | 1 No. |
Hacksaw Machine | 24 Inch | 1 No. |
18 Inch | 1 No. | |
12 Inch | 1 No. | |
Welding Machine | ||
Crane | 08 tone | 1 No. |
15 tone | 1 No. |